Filter
Top Products
21
Door Options
The door trim kit includes the door frame, the ash lip
trim, and the ash door tile frame. Available in brushed
stainless, gold or bright nickel, they add a beautiful
accent to your stove. To install, lay the frame face down
on a soft surface. Drill the four holes in the door using
the bit provided. You'll see there are dimples in the cast
iron showing where to drill. Fasten the door frame by
inserting the 4 threaded posts on the frame through the
door. The posts should line up with the 4 holes located
at the corners of the door. Once the posts are through
the door, fasten frame with 4 nuts and tighten until the
frame is snug.
To install ash lip trim, simply slide the trim over the ash
lip and into the groove on the trim.
The ash door tile frame can be used with or without
the optional decorative tile. Slide the spring clip into the
channel on one end of the frame. Place the frame into
the recessed area on the door inserting the clip end
rst. The tension of the spring holds the frame in place.
Decorative tile is available in several designs. The tile
installs behind the trim on the ash door. Along with the
above pictured cut-out tile plate, there are ten different
picture tiles and four slate tiles available. See your
dealer for choices.
Door Frame
Ash Lip Trim
Brushed Stainless
Cutout Tile Plate
Ash Door Tile Frame
Optional Trim Decorative Tile
Cleaning Plated Trim
Gold or nickel plated hardware should never be buffed
or polished. Abrasive cleansers and metal polishes will
remove the plating and therefore should never be used.
If the plating needs to be cleaned, wait until the stove
is completely cool, then use a sponge, soap and water
to gently remove dirt and stains. Before relighting the
stove, remove all soap residue and wipe dry.