Filter
Top Products
10
#6 Installing into an existing replace
chimney
This method provides excellent venting for normal
operation. This method also provides natural draft
in the event of a power failure.
Some places in the US and Canada it is required
that the vent pipe extend all the way to the top of
the chimney.
In this method a cap should also be installed
on the chimney to keep out rain. Be sure to use
approved pellet vent pipe ttings. Seal pipe joints
with silicone in addition to the sealing system used
by the manufacturer. Pipe size should be increased
to 4" using this method.
#7 Installing into an existing chimney
This method provides excellent venting for normal
operation. This method also provides natural draft
in the event of a power failure.
Some places in the US and Canada it is required
that the vent pipe extend all the way to the top of
the chimney. The pipe or liner inside the chimney
should be 4"diameter.
In this method a cap should also be installed on
the chimney to keep out rain.
Fig. 12
Fig. 13
Venting