Filter
Top Products
17
Fig. 31
Fig. 30
Brush not supplied. Can be found in
hardware stores.
Soot and Fly Ash
The products of combustion will contain small particles
of y ash. The y ash will collect in the exhaust venting
system and restrict the ow of the ue gases. Incomplete
combustion, such as occurs during startup, shutdown,
or incorrect operation of the room heater, will lead to
some soot formation which will collect in the exhaust
venting system. The exhaust venting system should
be inspected at least once every year to determine if
cleaning is necessary.
Maintenance
Exposed blower wheel
and ue opening, NOTE:
ESP probe is visible.
ESP probe
Fig. 28
Blower cover
removed.
ESP Probe
Fig. 29
Be careful not
to damage ESP
probe when
cleaning with
brush.
7. Open the burn pot slide as shown, clean with vacuum
and close.
8. Clean the heat exchanger with the scraper as shown
in Fig. 25.
9. Brush or scrape the inside of the stove to remove
y ash.
10. Scrape the burnpot with the at end of the provided
scraper. Fig.31.
11.Slide the ash pan into stove and re-latch the ash
pan door.
Latch "closed "with blower
cover in place. Burn pot
clean-out is closed.
Fig. 26
Latch "open "with blower
cover partly removed. Burn
pot clean-out is open.
Fig. 27