Filter
Top Products
14
#3 Installing into an existing
chimney ( US only )
This method can be used for normal operation.
This method also provides natural draft in the event
of a power failure. If the chimney condition is ques-
tionable you may want to install a liner as in method
#6.
#4 Installing into an existing
fireplace chimney ( US only )
This method can be used for normal operation.
This method also provides natural draft in the event
of a power failure.
The damper area must be sealed with a steel
plate or fiberglass. A cap should be installed on the
chimney to keep out rain. If the chimney condition is
questionable you may want to install a liner all the
way to the top as in Method #5.
Fig.22
Fig.23
Venting
Evaluation notes were added to the output document. To get rid of these notes, please order your copy of ePrint IV now.