Filter
Top Products
SKU 92274 For technical questions, please call 1-800-444-3353. PAGE 8
6. Water transfers in cycles. Do not attempt to manipulate the automatic Switch
(3) to keep the Sump Pump running continuously. It is meant to shut off
intermittently. Doing so will damage the Pump.
7. Make sure the discharge pipe (not included) is secured to a solid surface to
ensure the stability of the Sump Pump.
8. Make sure to position the Base Plate (24) of the Sump Pump on a flat, level
surface.
9.
If necessary,
have a certified electrician install (within six feet of where the
Sump Pump will be located) a 115 volt, grounded, electrical outlet that is
dedicated only to the Pump. Any outlet must be above the water line.
10. In cold weather, when the Sump Pump is not in use, protect the interior of
the Pump from freezing by draining the liquid and pumping a permanent
type automobile anti-freeze containing a rust inhibitor through the system.
A 50% mixture with water is recommended. Be sure to flush the system with a
neutralizing liquid prior to re-use of the unit.
11. Prior to use, and periodically thereafter, check to make sure all connections
are tight and secure.
12. Industrial applications must follow OSHA requirements.
13. Performance of this machine (if powered by line voltage) may vary depend-
ing on variations in local line voltage.
14. Prior to use, and periodically thereafter, check to make sure the Float Rod
(10) moves freely.
15. WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference or failure of the pacemaker.
16. WARNING! The warnings and cautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied the the operator.
SAVE THESE INSTRUCTIONS