Filter
Top Products
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front cover.
Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
SKU 92274
PAGE 2
For technical questions, please call 1-800-444-3353.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists on page 13
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
IMPORTANT SAFETY INSTRUCTIONS
Item Description
Electrical Requirements 115 V / 60 Hz / 5.2 Start AMPs.
1/3 HP Motor / Single Phase / 1725 RPM.
Continuous Run Thermal Overload Protection.
3-Prong Power Plug / 6 Ft. Long Power Cord.
Fused Circuit: 15 AMP Capacity Required.
Pump Type Centrifugal / Pit Type / Self-Priming.
Maximum Lift: 17 Ft.
Discharge Size: 1-1/4” Diameter x 11.5 TPI Female.
Maximum Particle Size 1/8” Diameter Solids.
Maximum Water Temperature 140 Degrees Fahrenheit.
Minimum Water Level 2-1/2” Deep.
Pump Down Range 9” To 10”.
PH Range 6 To 9.
Overall Dimensions 30” L x 9” W x 33” H.
Weight 13.70 Pounds.