Filter
Top Products
INSPECTION, MAINTENANCE, AND CLEANING
SKU 92274 For technical questions, please call 1-800-444-3353. PAGE 12
1. WARNING! Make sure the Sump Pump is unplugged from its electrical
outlet before performing any inspection, maintenance, or cleaning procedures.
2. Before each use, inspect the general condition of the Sump Pump. Check for
clogs throughout the system, misalignment or binding of moving parts, damaged
electrical wiring, damaged or loose discharge pipes, and any other condition that
may affect its safe operation. If abnormal noise or vibration occurs, have the
problem corrected before further use. Do not use damaged equipment.
3. Every six months, pour an ounce of 30 weight oil into the hole near the top of
the Support (21). A label next to the hole indicates where to add the oil.
4. The Motor is permanently lubricated and requires no additional lubrication.
5. If the Sump Pump is not in use due to dry conditions, etc., pour enough
water into the pit to activate the Pump once every 3 months.
6. Periodically, check to make sure the pit is free from accumulated debris, rocks,
and other objects that may damage the Sump Pump.
7. When cleaning, NEVER introduce water or any other liquid into the Motor Hous-
ing.
8. In cold weather, when the Sump Pump is not in use, protect the interior of the
Pump from freezing by draining the liquid and pumping a permanent type auto-
mobile anti-freeze containing a rust inhibitor through the system. A 50% mixture
with water is recommended. Be sure to flush the system with a neutralizing liquid
prior to re-use of the unit.
9. CAUTION! All maintenance, service, or repairs not listed in this
manual are only to be attempted by a qualified service technician.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR
WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.