Filter
Top Products
HI200 Hampton Wood Cast Insert18
HANDLE
REPLACEMENT
1) Remove handle by undoing the hex head bolt using a 7/16" socket
wrench.
2) Fit new door handle over door latch and secure.
Assemble handle by:
a) Placing lock washer and split lock washer over hex head bolt.
b) Place hex head bolt into handle.
c) Place spacer over hex head bolt threads.
d) Screw handle into door latch.
LATCH ADJUSTMENT
The door latch may require adjustment as the door gasket material com-
presses over time. Removal of spacers will allow the latch to be moved
closer to the door frame, causing a tighter seal.
1) Remove the Latch Assembly from the unit by undoing the 2 outer hex
bolts.
2) Remove the Latch from the Mounting Bracket by undoing the 2 inner
hex bolts.
3) Remove the necessary amount of spacers sitting on the Mounting
Bracket. Ensure an equal amount of spacers are removed from both
top and bottom.
4) Re-secure the Latch to the Mounting Bracket using 2 inner hex
bolts.
5) Re-secure the Latch Assembly to the unit using the 2 outer hex
bolts.
MAINTENANCE