GE 1000 Home Security System User Manual


 
Security Pro 1000 13
Both Option 81 and 82 can be turned on at the same time.
Thermostat has to be in Auto Mode for Options 81 and 82 to work correctly.
When the panel is disarmed the thermostat returns to normal operating mode.
Programming
Your System
The programming decals are visible when you open the panel cover (see below).
These decals are designed to make system programming easier for you. Always begin
by entering your access code. Then, choose an operation from the START MENU.
Follow the prompts and flow arrows to complete the desired task. Notice the button
flow diagrams following the Instruction Summary.
Figure 1. Opening the panel cover
Programming Instructions
Use the following instructions to access the programming buttons and programming
decals.
1. System must be disarmed. Open the Panel Cover by pressing the plastic latch on
the top of the panel. When you open the cover you will immediately be prompted
by the panel voice to use the numbered keys to enter your ID.