GE 1000 Home Security System User Manual


 
Security Pro 1000 9
Panel Indicator Lights
Use the following table to understand the panel indicator lights.
Numeric Pager
You may program your security system to send a numeric message indicating system
activities to your pager. The system will send the message twice. See “Programming
Instructions”.
Use the following table to determine what the numeric message is reporting.
Alarm Siren and X10 Light Information
Fire Intrusion Emergency
X10 Lights Steady Flashing Steady
X10 Siren Steady Steady Alarm beeps
Interior & Panel Siren Temporal 3 Steady Fast on/off
Exterior Siren Temporal 3 Steady
Panel Indicator Lights
Button
When the Button Light is
On
When the Button
Flashes
Arm Doors & Windows Doors/Windows armed Doors/Windows armed
& No Entry Delay on
Arm Motion Sensors Motion Sensors armed Motion Sensors armed
& Latchkey on
Disarm System disarmed System subdisarmed
System Status System trouble or Open Sen-
sor
System in alarm
Chime Doors Door will cause chime _________________
Chime Special Motion Motion will cause chime _________________
Time Lights Time activated lights on _________________
Sensor Lights Sensor activated lights on _________________
Numeric Pager Reporting
Reports Numeric Message Reports Numeric Message
Phone Test -101 -101 Intrusion -108 -108
AC Power Restore -102 -102 Fire -109 -109
AC Power Failure -103 -103 Disarming -110 -110
Latchkey -104 -104 Arming -111 -111
No Activity -105 -105 Fail to Open -112 -112
Emergency -107 -107 Fail to Close -113 -113