Filter
Top Products
5
3.1 To turn the stove off, locate the control valve, turn the
lefthand control knob until it points to off ( ). The main
burner will go out leaving the pilot burning.
3.2 To turn the pilot off, locate the control valve, turn the right
hand control knob until it points to off ( ), the pilot will go
out.
4.1 Your stove is fitted with a control valve that can easily be
upgraded to battery powered remote control. This upgrade
can be fitted by anyone capable of simple DIY jobs and
requires no special training. There are two versions of this
control which can be obtained through your local Gazco
stockist.
4.2 STANDARD REMOTE CONTROL This remote control can
control the gas appliance after the pilot has been lit. It can
turn the main burner on and regulate it from low through to
high and back again. It can turn the main burner off leaving
the pilot burning GAZCO PART NUMBER 8455.
4.3 THERMOSTATIC AND TIMER REMOTE CONTROL This
remote control can control the gas appliance after the pilot
has been lit. In ‘MANUAL MODE’ it can be used to turn
the main burner on and manually regulate it from low
through to high and back again. It can also be used to turn
the main burner leaving the pilot burning. In ‘AUTO
MODE’ it will automatically regulate the room temperature
to a pre-set temperature. In ‘TIMER MODE’ it will turn the
fire on and off according to a pre-set programme and
automatically regulate the room temperature during the two
on periods. GAZCO PART NUMBER 8456
ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS
The fuel effect and side panels in this appliance are made
from Refractory Ceramic Fibre (RCF), a material which is
commonly used for this application.
Protective clothing is not required when handling these
articles, but we recommend you follow normal hygiene
rules of not smoking, eating or drinking in the work area
and always wash your hands before eating or drinking.
To ensure that the release of RCF fibres are kept to a
minimum, during installation and servicing a HEPA filtered
vacuum is recommended to remove any dust accumulated
in and around the appliance before and after working on it.
When servicing the appliance it is recommended that the
replaced items are not broken up, but are sealed within
heavy duty polythene bags and labelled as RCF waste.
RCF waste is classed as stable, non-reactive hazardous
waste and may be disposed of at a licensed landfill site.
Excessive exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract; wash hands
thoroughly after handling the material.
5.1 Open the door by undoing the grub screw with the 2mm
Allen key. Rotate the doorknob anti-clockwise until the
door is able to open. See diagram 2.
5.2 Carefully remove the ceramic fuel bed components and
place to one side, taking care to protect floor coverings etc,
PLEASE HANDLE WITH CARE.
5.3 The coals should not require cleaning. Do not use a
vacuum cleaner or brush to clean the coals, any large pieces
of debris may be removed by hand.
5.4 Ensure any debris is removed from the burner ports.
5.5 Replace the ceramics by referring to section 6.
5.6 Use a damp cloth to clean the outer casing of the
appliance.
4. UPGRADING YOUR STOVE
5.CLEANING THE FIRE
USER INSTRUCTIONS
3. TURNING THE STOVE OFF
WARNING: DO NOT ATTEMPT TO CLEAN
THE STOVE UNTIL IN A COLD
CONDITION. THE STOVE RETAINS ITS
HEAT FOR A CONSIDERABLE TIME AFTER
SHUTDOWN.
AR1439
2