Filter
Top Products
190-01007-A1 System Maintenance Manual GTN 6XX/7XX Part 23 AML STC
Rev. 7 Page 6-10
6.6 NAV Antenna Cable Splitter
Removal
1. Disconnect the coaxial connectors from splitter, taking note of which co
axial connectors are
connected to each port on the splitter.
2. Remove the mounting screws and splitter.
Reinstallation
1. Reinstall the splitter over the existing hole pattern and reinstall fasteners. To
rque fasteners within
5 to
6 in-lbs.
2. Reconnect the coaxial connectors to the splitter.
Approved Hardware for Replacement
Stainless Hardware
Note: Part numbers in parentheses are inactive or cancelled part numbers; these numbers may still be
available and/or referenced on packaging material.
Steel Hardware
Note: Part numbers in parentheses are inactive or cancelled part numbers; these numbers may still be
available and/or referenced on packaging material.
Name Part Number
Screw, Pan Head, Stainless MS51957, (AN515C)
Washer, .016 thickness NAS1149CN416R, (AN960C-4L)
Washer, .032 thickness NAS1149CN432R, (AN960C-4)
Nut, Self-locking Metal, Hex, Thin NASM21043-04, NAS1291C04, (MS21043-04)
Nut, Self-locking Metal, Hex NASM21046C04, (MS21046C04)
Nutplate, One Lug, Fixed MS21052, MS21054, MS21072
Nutplate, One Lug, Floating MS21062
Nutplate, Two Lug, Fixed MS21048, MS21050, MS21070
Nutplate, Two Lug, Floating MS21060, MS21076
Nutplate, Corner MS21056, MS21058, MS21074
Nutplate, Side-by-side MS21087
Name Part Number
Screw, Pan Head, Low Carbon Steel NASM35206, (MS35206), (AN515)
Screw, Pan Head, Alloy Steel NAS600
Washer, .016 thickness NAS1149FN416P, (AN960-4L)
Washer, . 032 thickness NAS1149FN432P, (AN960-4)
Nut, Self-locking Metal, Hex, Thin NASM21042L04, NAS1291-04, (MS21042L04)
Nut, Self-locking Metal, Hex NASM21045L04, (MS21045L04)
Nutplate, One Lug, Fixed MS21051, MS21053, MS21071
Nutplate, One Lug, Floating MS21061
Nutplate, Two Lug, Fixed MS21047, MS21049, MS21069
Nutplate, Two Lug, Floating MS21059, MS21075
Nutplate, Corner MS21055, MS21057, MS21073
Nutplate, Side-by-side MS21086