Filter
Top Products
13
When in the SYSTEM COOL or HEAT or FAN ONLY mode, you
can also select FAN MODE, FAN SPEED, TIMER SCHEDULE, and
. The SYSTEM MODE does not change.
SET POINT
F
CONTINUOUS
SET POINT
F
AUTO FAN
SET POINT
F
AUTO FAN
SYSTEM - The
SYSTEM
button allows you to sequentially select the modes
of operation. To select, press once and let go.
COOL MODE
HEAT MODE N
Automatically changes between HEAT and COOL
(HEAT and COOL ONLY Units)
ot available on some models
F
AUTO MODE
AN ONLY MODE
COOL ONLY MODE
FRR103
FRR105
FRR104
HEAT MODE
AUTO MODE COOL
FAN ONLY MODE
When in the
AUTO FAN
mode, the fan operates only when the system has
a demand to cool or heat the room. Note: the fan is off (no fan speed icon),
indicating no command for cooling or heating.
FRR112
FRR106
System has a demand for cooling. The fan is operating at a medium speed.
CONTINUOUS
FRR113
In the
CONTINUOUS
fan mode, the fan operates all the time. The system
periodically cools or heats the fan's airfl ow but the fl ow of air does not stop.
FAN SPEED - The
FAN
SPEED
button allows you to toggle between four speeds: LOW, MEDIUM, HIGH, MAX and AUTO speed operation. Press once and let go each time.
FRR095
4 Speed
AUTO
FAN MODE – The
FAN
MODE
button allows you to select between
AUTO FAN
and
CONTINUOUS
modes. To select, press once and let go.
AUTO FAN (Cooling Demand)
Control Panel Operation Instructions
During the (SYSTEM mode COOL or HEAT), the fan speed automatically varies depending on the difference between the unit's set point on the control
panel and the actual room temperature. Let me explain. Say for example, you’re working in your garage and you open the big door for several minutes. The
system will sense a wide difference between the set point and the actual room temperature. When this occurs, the system fan speed increases to HIGH for
a per
iod of time. The fan speed decreases, in step, as the temperature difference decreases. When the room temperature matches the system's set point,
fan speed returns to the lowest setting, and if the fan mode is on AUTO FAN, the fan will stop.
SET POINT
F
AUTO FAN
FRR204
- AUTO -
FAN SPEED - Cooling only units have 4 fan speeds, except models
SL28 and SL36. All Cool+Heat units only have 3 fans speeds.
SET POINT
F
AUTO FAN
SET POINT
F
AUTO FAN