Filter
Top Products
Ð4Ð
SYSTEM OVERVIEW
Fire & Emergency
Protection
The fire and emergency protection portions of your system are always on and
will sound an alarm if an alarm condition is detected.
Alarms
When an alarm occurs, the control's buzzer, the keypad and external sounders
will sound, and a message at the keypad will identify the zone(s) causing the
alarm. In addition, an alarm message will be sent to the connected central
monitoring station. You may stop the sound by pressing the SILENCE/RESET
button at the control, or by entering the OFF sequence (user code + OFF key) at
your keypad .
Memory Of Alarm
When an alarm, supervisory or trouble condition occurs, the keypad displays the
number(s) of the zone(s) that caused the problem, and displays the type of
condition present (ex. Fire, Alarm, Supv., Check). The display remains until it is
cleared by entering the OFF sequence (user code + OFF key) a second time or
by pressing the SILENCE/RESET button a second time if no keypad is present.