Filter
Top Products
Ð21Ð
ACTIVATING A FIRE DRILL TEST
Using the
#
+6+9 Keys
This feature can be
activated only while no
alarm, supervisory, or
trouble condition is
present.
This test requires that a keypad and external fire alarm sounder be installed
with the system.
Note: Only User Number 2's code can activate this test.
This test activates the external fire alarm sounders for the purpose of conducting
a fire alarm drill. Your system will remain operational for fire alarm signaling while
this test is active (
although no message will be sent to the central station unless
an actual alarm occurs).
¥ To activate the Fire Drill Test:
Enter User Number 2's code, then press the #
+ 6 + 9 keys.
The keypad LCD will display "FIRE DRILL ACTIVE (Alpha) or "TEST dF"
(Fixed-Word) and the external fire alarm sounders will produce either a steady
or a pulsing sound while this test is active, depending on what your installer
selected.
FIRE DRILL
ACTIVE
ALARM
AWAY
BYPASS
STAY
SUPV NO AC
PHONE TEST
NOT READY
CHIME BAT
FIRE
CHECK INSTANT TAMPER
dF
ALPHA FIXED-WORD
¥ To terminate the Fire Drill Test:
Enter any User Code, followed by the OFF key.
Your system will also automatically terminate this test if an alarm, supervisory
or trouble condition is detected while it is activated.