Filter
Top Products
Ð14Ð
FIRE ALARM PROTECTION
General Your system may have sensors which detect fire alarm conditions such as smoke
detectors, heat detectors, sprinkler waterflow sensors, etc. You system monitors these
sensors 24 hours a day for continuous protection and provides a number of indications
when a fire alarm condition is detected.
In Case Of Fire
WHEN A FIRE ALARM CONDITION IS DETECTED, EVACUATE ALL
OCCUPANTS FROM THE PREMISES IMMEDIATELY AND NOTIFY YOUR
LOCAL FIRE DEPARTMENT.
Your system provides the following indications when a fire alarm condition is detected:
¥ The control's buzzer and keypad buzzer produces a slow on/off pulsing sound.
¥ The external fire alarm sounders produce either:
ÊÊÊ a steady sound or ÊÊÊ a pulsing sound,
depending on what your installer selected (check the appropriate box).
¥ The keypad LCD displays the word "FIRE" (Alpha) or "FIRE ALARM" (Fixed-Word)
along with the number of the zone in alarm.
FIRE 05
FILE ROOM
ALARM
AWAY
BYPASS
STAY
SUPV NO AC
PHONE TEST
NOT READY
CHIME BAT
FIRE
CHECK INSTANT TAMPER
05
ALPHA FIXED-WORD
¥ A fire alarm message is sent to the central station.
If your system has a keypad with a FIRE alarm emergency key, then these indications
may be manually triggered by pressing this key for at least 2 seconds, (or the
corresponding emergency key pair), should you become aware of a fire emergency
before your detectors sense the problem.