Filter
Top Products
Ð11Ð
REMOTE KEYPAD EMERGENCY KEYS
Using
Emergency Keys
(for manually activating
silent and/or
audible alarms)
Your installer may have programmed the keypad's A, B, or C keys to allow
manual activation of fire and/or emergency alarms. The functions that might be
programmed are: Fire, Silent Emergency, Audible Emergency, and Personal
Emergency.
A fire alarm sends a fire alarm message to the central station and uniquely
sounds at the control and at keypad(s) and external bells and sirens. A FIRE
message plus a zone number (see table on next page) is also displayed on the
keypad.
A silent emergency sends a silent alarm signal to the central station,
but there is
no audible alarm or visual display
.
An audible emergency sends a signal to the central station and sounds a loud,
steady alarm at the control and at your keypad(s) and at any external sounders
that may be connected. An ALARM message plus a zone number (see table on
next page) is also displayed on the keypad.
A personal emergency
alarm sends an emergency message to the central
station and sounds at the control and at keypad(s), but not at external bells or
sirens. An ALARM message plus a zone number (see table on next page) is also
displayed on the keypad.
TO MANUALLY ACTIVATE A FUNCTION AT ANY TIME OF DAY OR NIGHT
(SEE TABLE ON NEXT PAGE)
Press the programmed A , B , or C emergency key for at least two seconds,
or alternatively,
Press
both
keys of the corresponding 1 & ✱ (A), ✱ &# (B), or 3 &# (C) emergency key
pair at the same time.