Filter
Top Products
– 52 –
Programming Device Timers (cont’d)
00 DAYS? MTWTFSS
HIT 0-7 X X
Select the days on which the device is to be
activated by entering 1-7 (Monday = 1). An
"X" will appear under that day, indicating
the output for that day is active. Entering a
day's number again will deactivate that day.
Pressing 0 will turn all days on/off. The
outputs will only be in effect for the days
which have the letter x underneath them.
As the week progresses, the selected days
are reset to the inactive state, unless the
permanent option is selected (next screen
prompt). When completed, press * to
continue.
00 PERMANENT ?
0 = NO, 1 = YES 0
Answering 1 (yes) means the system will
continue executing this timer on a
continuous basis. An answer of 0 means
execute each day's output only once.