Filter
Top Products
– 22 –
Accessing Other Partitions
To Access Another Partition
Each keypad is assigned a default partition for display purposes, and
will show only that partition's information. But, if the user is
authorized, a keypad in one partition can be used to perform system
functions in other partitions by using the GOTO command. Note that
only those partitions authorized and programmed by the installer can
be accessed in this manner.
To GOTO another partition:
READY
1. Enter your security code, then press ✴ + partition number (1-8).
Entering partition number 0 will return the keypad to its original
partition.
2.
LOG-ON TO AAAA
PART. X COMPLETE
The keypad will remain in the new
partition until directed to go to another
partition, or until 2 minutes has elapsed
with no keypad activity.
AAAA = alpha descriptor programmed by
the installer
X = partition number
Global Arming
The Global Arming option may have been programmed for use by
some users. If Global Arming was enabled for use with your security
code, a keypad prompt (message) will appear after pressing one of the
arming function keys (STAY, INSTANT, AWAY, MAXIMUM, OFF).
Follow the keypad prompts to continue arming the system. See your
installer for detailed instructions on the use of this feature.
If global arming does not apply to your security code, use the
procedures described in the following pages.