Filter
Top Products
– 28 –
Checking For Open Zones
Using the
✴
READY Key
Before arming your system, all protected doors, windows and other
protection zones must be closed or bypassed (see BYPASSING
section). Otherwise the keypad will display a "Not Ready" message.
Using the READY key will display all zones that are faulted, making
it easier for you to secure any open zones.
To show faulted zones:
DISARMED - PRESS
✴
TO SHOW FAULTS
Note: Some keypads light a green LED
when the system is ready. If not lit, the
system is not ready to be armed.
READY
1. Do not enter security code, but simply press
✴
.
FAULT 005 FRONT
UPSTAIRS BEDROOM
Typical fault display
2.
DISARMED
READY TO ARM
Secure or bypass the zones displayed
before arming the system. The "Ready"
message will be displayed
†
when all
protection zones have been either closed or
bypassed.
†
NOTE: All or part of this message may
be replaced by a customized message
programmed by the installer. Bear this in
mind whenever the instructions indicate
that the "DISARMED" or "READY"
message will be displayed.