Filter
Top Products
– 46 –
Using Schedules
Delaying the Closing Time
Your system's programmed schedules may automatically arm the
system at a predetermined time. In the event a user must stay on the
premises later than usual, users with master or manager authority
levels can manually delay the automatic arming (closing) time up to 2
hours.
To delay the closing time:
1. Enter your security code (master or manager authority levels only).
2. Press the #
key, followed by 82.
3. A menu prompt will be displayed, asking for the number of hours
of delay.
CLOSING DELAY?
HIT 0-2 HOURS
Enter the desired number of hours of delay,
1 or 2. The system will automatically exit
this mode after entry.
Note that the delay is from the scheduled closing time, not from
the time the command is entered.
IMPORTANT: The selected delay cannot be reduced once it is
set. A 1 hour delay can be increased to 2 hours, though.
4. The system will automatically send a message to the central
station informing them that the programmed schedule has been
changed.
Temporary Open/Close Schedules
Temporary schedules allow you to override the normal schedules
programmed by the installer. Temporary schedules can be in effect for
up to one week, and take effect as soon as they are programmed.