Filter
Top Products
5
HOW TO ASSEMBLE - See Back Page for Assembly Items Packed in Carton.
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts. Make sure on/off switch is in off (0) position before plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Attach Handle
1. Move hose from the storage position to expose screw
holes on cleaner. (See above.)
2. From rear of cleaner, align handle with screw locations
on cleaner. Slide handle into position.
3. Attach handle with the two screws provided in the
assembly packet. Use a Phillips
®
#2 head screwdriver.
Handle
Step B Store Hose and Accessories
4. To store hose, lay hose over hose retainer.
5. Store tools. Place crevice tool, combination brush and
nesting wands where indicated above.
Crevice
Tool
2
2
2 Locations
for Screws
Hose
Retainer
Combination
Brush
Hose
Retainer
Nesting
Wands