Filter
Top Products
Cleaning And Replacing Filters (continued)
HEPA Filter
Check the HEPA filter once a month. Replace at least twice
a year or if suction is declining. Some models have a
red HEPA Filter warning light. If light comes on and
stays on, replace filter.
HINT: For ease of assembly, lay cleaner on its back
and proceed to the following instructions.
To Remove HEPA Filter - Style HF2
1. Squeeze HEPA door latch and swing door down and
out of cleaner.
2. Remove HEPA filter.
To Replace HEPA Filter
1. Place HEPA filter inside HEPA compartment with rubber
seal against the back of the compartment.
2. Replace HEPA door. Place tab on bottom of HEPA door
into slot on cleaner and swing door up pushing against
the latch until it locks into place.
How To Change Light Bulb
NOTE: Turn off the power switch and disconnect the
electrical cord before changing light bulb.
1. Lower handle to remove two screws from lens cover.
2. Remove lens cover from cleaner.
3. Pull up on light bulb to remove.
4. Push new light bulb into socket.
5. Replace lens cover.
6. Secure with two screws.
Use replacement bulb, 57940-2.
13
Use replacement HEPA filter, 61111.
HEPA
Door
Latch
HEPA
Filter
HEPA Door
Tab