Filter
Top Products
How to Reassemble Clear Tube
10. Reattach hose to clear tube. Insert hose and rotate clockwise to secure.
11. Hook the bottom of the clear tube on the cleaner next to the combination brush storage location.
12. Swing top of tube up and against the cleaner till quarterturn lock is in place. Then fasten using a coin turning the
quarterturn lock clockwise.
13. Place accessory nozzle into hose adapter.
15
10
11
12
13
How to Check for Blockages in Brush Roll Compartment
14. Remove 3 base plate screws using a Phillips
®
#2 head screwdriver. Lift base plate off base.
15. Remove brush roll from brush roll compartment.
16. Check for blockages at hose inlet location inside the brush roll area.
Reassemble following above directions in reverse.
14
15
16