Filter
Top Products
Mounting multiple transmittersFigure 2-2:
A
B
A. 0.33 in or greater (8.5 mm or greater)
B. End bracket or end stop; 0.33 in (8.5 mm) minimum spacing
2.2
Prepare the 4-wire cable
Important
For user-supplied cable glands, the gland must be capable of terminating the drain wires.
Note
If you are installing unshielded cable in continuous metallic conduit with 360º termination shielding,
you only need to prepare the cable – you do not need to perform the shielding procedure.
Mounting and sensor wiring for 4-wire remote installations
Installation Manual 7