Filter
Top Products
Rosemount Tank Radar REX
Chapter 10 Mechanical Installation
10-34
Installation Manual
308014EN, Edition 4
May 2013
10 Mount the Transmitter Head on the Stand. Check that the guide pins on
the stand fits to the corresponding holes on the Transmitter Head.
Tighten the nuts so the Transmitter Head is firmly attached to the Stand.
11 Put the Waveguide Unit into the
base of the Transmitter Head. It
can only be entered one way.
(Do not mount the two M6 stop
screws yet!).
Guide pins x 2 Nuts x 4
3950_3_TH_mount.eps
Waveguide unit
3950_3_waveguideunit.eps