Filter
Top Products
7
2. Carefully lift the fan and seat the hanger ball/down-
rod assembly on the hanger bracket that was just
attached to the outlet box (Figure 13). Be sure the
groove in the ball is lined up with the tab on the
hanger bracket (Figure 12).
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
WARNING
OUTLET
BOX
HANGER
BRACKET
HANGER BALL/
DOWNROD
ASSEMBLY
NOTE: CEILING COVER,
SUPPLY WIRES AND
FAN WIRES OMITTED
FOR CLARITY.
Figure 13
To avoid possible fire or shock, do not pinch wires
between the hanger ball/downrod assembly and
hanger bracket.
WARNING
How to Hang Your Ceiling Fan
FLOOR
AT LEAST
7'
CEILING
Figure 11
The fan must be hung with at least 7' of clearance
from floor to blades (Figure 11).
WARNING
TWO SCREWS
SUPPLIED WITH
OUTLET BOX
HANGER
BRACKET
TAB
OUTLET
BOX
Figure 12
The outlet box and joist must be securely mounted
and capable of supporting at least 50 lbs. Use only a
U.L. outlet box listed as “Acceptable for Fan Support
of 50 lbs. or less”.
WARNING
Hanger bracket must seat firmly against outlet box. If
the outlet box is recessed, remove wall board until
bracket contacts box. If bracket and/or outlet box are
not securely attached, the fan could wobble or fall.
WARNING
1. Securely attach the hanger bracket to the outlet
box using the two screws supplied with the outlet
box. (Figure 12.)