Filter
Top Products
25
Programming
9. If you program Monday the first
time you press PROGRAM
VIEW
it
will be copied to the rest of the week.
To program the other days of the week
press
ADV.
/DAY until you reach the
day you wish to change and follow
Steps 10, 11 & 12. You can also copy
the program from one day to another.
To copy, press
HOLD
/COPY. The
display will show COPY, and all the
other days of week will be flashing.
Press
HOLD
/COPY again to copy the
day in to the rest of the week or press
TIME
FWD
or TIME
BACK
until
you reach the day you want to copy to
and press
HOLD
/COPY.
10.Press TIME
FWD
or TIME
BACK
to set the time on the display as
selected in your HEATING or
COOLING Schedule. Be sure to
check the AM or PM on the display.
11.Press the red or blue
button to adjust the temperature to
match your schedule. If you want the
fan ON continuously during this
period, press
FAN
.
12.Press PROGRAM
VIEW
one time.
MOR on the display will change to
DAY. Repeat steps 10 and 11 to enter
time and temperature for this period.
13.Press PROGRAM
VIEW
to
continue through the entire schedule,
entering time and temperature for each
period. When you are satisfied that
your program matches your schedule,
press PROGRAM
RUN
. Program-
ming is now complete for this mode
and your program is running.
14.To program the other mode, repeat
the procedure from step 6.