Filter
Top Products
20 DX-WD1202
Need help? Call 800-305-2204
Step 14:
You may need to adjust the doors to make them fit correctly.
To adjust the doors from side to side (horizontal), loosen the mounting screw several turns, then turn the
horizontal adjusting screw in or out. Tighten the mounting screw after making adjustments.
To adjust the doors up and down (vertical), loosen both vertical adjustment screws. Move the doors up or
down to the best location. Tighten the screws after making adjustments. You can use a shim to help hold the
door in place.
To adjust the doors in or out (depth), loosen the mounting screw one turn and move the doors in or out, as
needed. Tighten the mounting screw after making adjustments.
You’ll need:
Horizontal
adjusting screw
Mounting
screw (depth)
Vertical
adjusting screws
Shim
Phillips screwdriver
Shim