Filter
Top Products
14 DX-WD1202
Need help? Call 800-305-2204
Step 8:
Fasten the bottom (E) to the left end (A). Use a flatblade screwdriver to tighten the two hidden cams. See
“Tightening hidden cams” on page 7.
Fasten the bottom (E) to the lower upright (C). Use a Phillips screwdriver and two black 1 7/8" flat head
screws (DD).
Slide the base (N) onto the notched edge of the bottom (E) so that the edge of the base is flush with the leg
on left end (A).
You’ll need:
Unfinished surface
Notched edge
Arrow
210°
Flatblade screwdriver Phillips screwdriver
DD (2)