Filter
Top Products
ULTRA FLAME DIRECT VENT GAS STOVE 11
8. Secure the 8 in. pipe to vent
terminal wall plate with the metal
screw;
9. Fix finally the vent terminal wall
plate with six 2 ½ in screws (12).
10. Insert the 5 in. flexible pipe (3) into
the 8 in. pipe and fix it to the vent
terminal casing. Use high
temperature silicone and one
locking band to secure it in pace;
NOTE: All joints must be sealed with
RTV silicone, 315°C. (600°F)
temperature resistance.
11. Install the vent casing and the
cover in place
12. Seal around the terminal to
prevent water leakage into the
house
13. Seal around the 8 in. pipe to
prevent cold air to get into the
house.
14. Seal around the cover slots to
avoid water infiltration into the
vent terminal;
15. Insert spring spacers into the 5 in.
flexible pipe;
16. Use all necessary rigid sections to
meet your specific needs. Fix 8 in.
pipes together with metal screws;
17. Put some high temp silicone on
the stove’s 5 in. flange. Insert one
locking band on the 5 in. pipe and
insert it on the stove flange. Make
sure seal is perfect. Tight the
locking band
18. Fix the 8 in. pipe to the stove with
three metal screws.
19. Fix Seal around the 8 in. pipe to
prevent cold air to get into the
house. your stove to the floor ;
20. Installation is now complete.
5" LOCKING BAND
SCREWS
5" FLEXIBLE FLUE PIPE
8"RIGID
A