Filter
Top Products
3
IMPORTANT INFORMATION BEFORE OPERATION
1. Fill freshwater tank and add deodorant to holding tank through toilet bowl.
2. Make sure all guests understand the operation of the toilet system and
the flushing instruction label is easy for guests to read. This label is lo-
cated under the seat, and is easily read when the seat is raised.
3. Remember the vacuum pump starts automatically. Shut off the toilet sys-
tem before servicing and do not leave the boat with toilet system breaker
on.
4. Never use drain openers, alcohol, solvents, etc. in the system.
5. If the system does not function properly, refer to the Troubleshooting section of this manual and repair as
necessary. If problem persists, contact your local SeaLand dealer or see the Customer Service section of this
manual.
1. To add water to the toilet before
using (if necessary), raise flush
handle until desired water level
is reached. (Water flow will stop
automatically after a period of
time).
2. To flush toilet, press flush handle
down. Water will flow into bowl
for two seconds, then flush ball
will open. Toilet will not flush
again until “OK to Flush” light is
on.
3. Do not dispose of sanitary
napkins or other non-dissolving
items in toilet, such as facial
tissue or paper towels. These
items can cause plugging of the
sanitation system.
FLUSH and FORGET
®
OPERATION
TOILET CONTROLS
ACCESS COVER
OFF
FLUSH
ADD WATER
TO BOWL
OFF
FLUSH HANDLE
CONTROL SWITCHES
Figure 1