Filter
Top Products
10
FLUSH MECHANISM COMPONENTS
1. To access
base assembly
components,
remove decora-
tive screw caps
and unscrew
four bolts that
hold china toilet
to floor.
2. Remove access cover.
Lift up control module. Dis-
connect power cable and
vacuum control cable from
control module.
Do not disconnect flush
handle cable or base as-
sembly cable.
3. Lift china toilet
straight up and
set it down close
to front of floor
flange/adapter
assembly. Turn off
water to toilet and
disconnect flexible
water line at rear of
base assembly. The
toilet is completely
disconnected.
Mode
Switch
Water
Level Switch
Power
Cable
CONTROL MODULE
Input for
Base Assembly
Cable
Input
for
Flush
Switch
Cable
Input
for
Vacuum
Control
Cable
Flush
Switch
Flush
Handle
Cable
FLUSH HANDLE COMPONENTS
(under Access Cover)
Flush
Handle
Base Assembly
Cable
BASE ASSEMBLY COMPONENTS
(under china toilet)
Water Valve
Flush Ball
Closed Limit
Switch
Motor
Drive Arm
Rotor Arm
Flush Valve
Motor
Flexible Water Supply Hose
Open Limit
Switch
Discharge
Adapter