Filter
Top Products
4 Introduction
Special Fire Command Center Displays
As you use your system, you will occasionally see a display that asks
you to enter a code or that describes a condition on the system. Below
are some examples of the displays you will see:
ALARM
A 24 hour zone, such as a fire zone, has been tripped. Your system
may sound bells and/or sirens.
TROUBLE
There is a problem with a protection device or system component.
This display is accompanied by a description of the problem.
ENTER CODE
The system requires you to enter your user code. User codes can be
required for turning your system on, turning your system off, and
many other functions.
As you enter your user code, the display shows an asterisk (*) in place
of each digit pressed. This keeps others from seeing your user code
on the display as it’s entered.
TRY AGAIN or INVALID CODE
The user code you have entered is not recognized by the system.
Check the user code and try again.
INVALID LEVEL
All user codes have authority levels that allow the user to only access
certain functions. When a user attempts a function outside their
authority, the INVALID LEVEL message displays.
SYSTEM TROUBLE or SERVICE REQUIRED
There is a problem with one or more of the components in your
system. Contact our service department as soon as possible.
SYSTEM BUSY
The Addressable Fire Alarm Control Panel is performing another task
of a higher priority. This usually only takes a few moments.
Special Fire Command Center Tones
Your keyboard also contains a small speaker that allows it to alert you
to events as they occur on your system. Below are brief descriptions
of the different tones you'll hear from the keyboard:
Fire Alarm tone: An intermittent sweeping siren that sounds until the
fire alarm is silenced.
Key press tone: A short beep each time you press a key and it’s
acknowledged by the system.
Trouble tone: A steady tone indicating a trouble condition on your
system. Press any key except TEST or DRILL to silence. This only
silences the keypad and does not correct the condition that originally
caused the trouble.