Filter
Top Products
9User Menu
Menu Options 123456789
Sensor Reset
✔✔✔✔✔✔✔
Zone Status
System Status
✔✔✔✔✔✔✔
Display Events
✔✔✔✔✔✔✔
Alarm Silence
System Test
✔✔✔✔✔✔
Zone Monitor
✔✔✔✔✔✔
Outputs On/Off
✔✔✔✔✔
Service Request
Fire Drill
Set Time
User Codes
✔
✔
✔
✔
✔✔
✔
✔✔✔✔✔✔✔
✔✔✔✔✔✔✔
✔✔
✔✔
✔
✔
✔✔
✔
User Number User Code User Level
User Codes
User Code Level: 9 only
Function: Allows you to add, delete, and change a user's (person
operating the system) user code or authority level.
There are three characteristics associated with each user code that
define its capabilities within the system.
125 34812 7
User Number - Every user is numbered. This number identifies them
to the system and can be transmitted to the central station
User Code - Each user also has a 3 to 5 digit number they enter into
the keyboard. NOTE: A User Code cannot begin or end with zero, or
be in the range of 980 to 989, or be in the range of 1 to 299.
User Names - Each code may also be programmed with the user’s
name. Up to 16 characters may be entered.
User Level - The user is also assigned a level of authority (1 to 9) or
customized authority by the person administrating the system that
determines the functions the user can access.
The following table lists system functions users are allowed to access
based on the authority level assigned to their codes.
User Code Authority Levels
Note: Service Request is not displayed if it has not been enabled on
your system.