DMP Electronics XR2400F Smoke Alarm User Manual


 
14 User Menu
User Code Change Event Displays
This displays any addition, deletion, or change to a user code.
Display Description
ADD 11: 41A 10 / 17 User 19 added by user 12 at 11:41
AM.
US:19 BY US:12 Press the Select key under either user
(US:) number for the user name.
User Code Event Types - There are 3 event types you may see here:
ADD - User added DEL - User deleted
CHG - User code or authority level has been changed.
Supervisory Event Displays
This displays the date and time of an automatic test report.
Display Description
MSG 11: 58P 10 / 17 The test report was sent to the central
AUTO RECALL station at the date and time shown.
System Monitor Event Displays
This displays any problems with the system's AC power, battery, or
phone line(s) or any opening of a tampered panel box.
Display Description
TBL 11:41A 10/17 An AC failure occurred on Oct. 17. Press
POWER the SELECT key under 10/17 for the time
the failure occurred.
About the Display Events Section
This section of the user’s guide shows the User's Guide Display
Events items for the Fire Command Center and Remote Fire Command
Center displays. While in the Display Events function, use the
COMMAND and ARROW keys to go forward or backward through the
list of events.
Zone Event Displays
This section displays alarms, troubles, and other events that could
occur on your protection zones. Some of the Zone and Event types
listed here are not applicable to the XR2400F. Please disregard any
displays that are not discussed in this User’s Guide.
Display Description
ALR 10: 23P 10/17 An alarm occurred at 10:23
PM on Oct. 17.
OFFICE SMOKE Press any SELECT key to see the zone
number and zone type.
Zone Type - There are 7 possible zone types you may see here.
FIRE - Fire PANC - Panic BURG - Burglary
EMRG - Emergency SUPV - Supervisory
AUX1 - Auxiliary 1 AUX2 - Auxiliary 2
Event Types - There are 7 event types you may see here:
ALR - Alarm TBL - Trouble RST - Restore
LOW - Low battery MIS - Missing wireless transmitter
FLT - Zone Fault SVC - Service smoke detector