D-Link DCS-2100+ Home Security System User Manual


 
47
Configuration > Tools > Applications (Continued)
Click on the Default button to access the factory Default settings from the
Tools menu.
Click Apply on the screen to restore the factory default settings. This means
any changes made will be lost and the system will be reset to the initial status
when shipped from the factory. After confirmation, the system will restart and
require the IP Installer software program to setup the DCS-2100+.
Using the DCS-2100+ with an Internet browser
(continued)
Click Apply to make
changes effective
Configuration > Tools > Default
Click Default
FTP put snapshots with
date and time suffix -
If the suffix is added, the captured date and time
can be easily differentiated from the snapshot file
name in either sequential or event operation. For
instance, “video@20020102030405.jpg” means
the JPEG image was captured at 4 minutes and
5 seconds after 3 o’clock, January 2nd, A.D. 2002.
If the suffix is omitted, the file named “video.jpg”
on the external FTP server will be refreshed at
the specified interval.
http://192.168.0.146