Filter
Top Products
21
103280
INSTALLING
Continued
4. Place the crossover log (#5) on the back log and the top middle log. Make sure the peg
on the rear log is in the hole in the bottom of the crossover log. The crossover log
should fit in the cutout of the top middle log (see Figure 26).
Figure 26 - Installing Crossover Log (#5)
Crossover
Log (#4)
Hole
Peg
Cutout
5. Install fireplace screen by slipping notches of fireplace screen over screws on
front of fireplace (see Figure 27).
Notches
Screws for
Mounting
Screen
Figure 27 - Installing Fireplace Screen
WARNING ICON G001
WARNING
You must operate this fireplace with the fireplace screen in place.
Make sure fireplace screen is in place before running fireplace.