Filter
Top Products
humidity level. When the appliance reaches the humidity set
point the appliance will automatically stop working but the fan
will work at the minimum speed.
As soon as the humidity increases above the set point, the
appliance will automatically resume dehumidification operation.
Continuous Dehumidifying Function
In order to operate the continuous dehumidifying function
press button “-” untill the display shows “--”.
With this function the appliance will operate continuously.
TIMER
How to program the delayed start function: From the
OFF Position
1) With the unit in the stand-by position, press the but-
ton. On the right side the display will show and the
number of hours after which the appliance will start opera-
ting.
2) Use the + and - button to set the desired hours. Wait few
seconds to set the appliance. The symbol and the
remaining time will be displayed.
3) When the selected time is reached, the appliance will start
working.
How to Program the delayed stop function: From the
ON Position
1) With the unit in the ON position, press the button.
On the right side the display will show and the num-
ber of hours after which the appliance will stop operating.
2) Use the + and - button to set the desired hours. Wait a few
seconds to set the appliance. The symbol and the
remaining time will be displayed.
3) When the selected time is reached, the appliance will stop
working.
How to modify or disactivate the timer
If you wish to modify the set value, press the timer button once
and then buttons + and -.
If you wish to disactivate the timer press the timer button
twice.
Note: When switching the appliance on or when the electri-
city is restored, the appliance will start working on previously
selected mode.
9
DEHUMIDIFIER DD Series