DeLonghi DD SERIES Dehumidifier User Manual


 
6 Timer button
If you press the TIMER button the display will show the hours
after which you want the appliance to switch OFF or ON. Once
the timer is set the user can no longer adjust the room humi-
dity.
Display
Meaning of the codes or symbols which may be displayed:
-- -- Indicates that the appliance is in standby mode.
Tank warning symbol
If the water tank is full, improperly positioned or missing, the
tank warning light will start blinking. An alarm will sound until
the tank is either emptied or correctly positioned into place.
Defrosting indicator symbol
With an ambient temperature of less than 59°F (15°C) the
appliance performs defrosting cycles. While the appliance is defro-
sting, the defrosting symbol comes on and remains on until defrosting
is completed. This symbol will also be displayed if the unit is swit-
ched on immediately after being turned off. The unit requires 3
minutes before it can function again.
MODE SELECTION
1) Plug the appliance into a an outlet.
2) The display will show “-- --“ to indicate that the appliance is
in stand-by and ready for use. If the display shows “
it’s necessary to empty the tank or the tank is incorrectly
positioned
3) Press the ON/Stand-by button.
Dehumidifying Mode
The display will show on the left side the room humidity level
(ex.:
63) and on the right side the display will show the
degree of humidity you want to reach (ex.:
58 ).
Press the “+” or “-“ button to set the desired humidity level
(30% means a dry environment, 80% a humid environment).
Press the “ ” to select the fan speed (MIN/MAX). If you
select MAX, the appliance will operate to the maximum speed.
If you select MIN, the appliance will operate to the minimum
speed and the noise levels will be reduced.
Press button “ ” to display the Temperature on the LCD
display. On the left side the display will show first the °F and
then the temperature in °C.
After a few seconds, the display will automatically show the
8
DEHUMIDIFIER DD Series