Filter
Top Products
7
DESCRIPTION OF BUTTONS
1 ON/Standby button
ON/Standby button
2 "Fan" button
Press this button to select the Fan Speed (MIN or MAX).
3 Room Temperature Button
Temporarily displays the temperature measured in the room by
the appliance. If you press the button once you will see the
room
temperature in F for a few seconds, then in C for a few seconds,
then the display will return to the current level of humidity in
the room. If you press the button multiple times, it will cycle
through these
displays faster. Note: Temperatures displayed are indicative
only.
4 Humidity increase/decrease buttons
These buttons are used to adjust the desired humidity level,
with 5% increments; they are also used to set the timer. From
0 -10 the hours increase by 30 min. and from 10-24 the hours
increase by 1 hour increments.
5 Pump button
When you press the “Pump button” the display will show
“PUMP”. If the display shows “PUMP” blinking, it means that the
pump is not operating correctly.
Display
Increase
humidity
level
button
PUMP
button
TIMER
button
Fan speed
button
Room
temperature
button °F/°C
Decrease
humidity
level
button
ON/STAND-BY
CONTROL PANEL
DEHUMIDIFIER DD Series