Filter
Top Products
INSTALLATION AND OPERATION MANUAL
MF3700, MF3800 Models
Page 22 800-345-6007
CumberlandStoveWorks.com
Figure26:Cleaningtool.
Figure27:Heatexchangerscraperrod.
When the unit is cleaned out, empty the hopper, take
theventingapartandcleanouttheyash,rinseand
let dry. Inspect the draft blower and clean out all areas.
Clean the glass, doors and outer cabinet so that you are
readyforthenextheatingseason.Useofanashvacuum
makes cleaning easier and faster.
TROUBLESHOOTING & REPAIR
At Ardisam, we build quality and durability into the design
of our products; but no amount of careful design by us, and
carefulmaintenancebyyou,canguaranteearepair-free
life for your stove. Most repairs will be minor, and easily
xedbyfollowingthesuggestionsinthetroubleshooting
guide in this section.
The guide will help you pinpoint the causes of common
problems and identify remedies.
For more complicated repairs, you may want to rely on
your retailer, an authorized service center or Ardisam, Inc.
A parts catalog is included in this section.
We will always be glad to answer any questions you have,
orhelpyoundsuitableassistance.Toorderpartsorinquire
about warranty, call or write us at the address found below,
under the section ordering repair parts.
ORDERING REPLACEMENT PARTS
Parts can be obtained from the store where the stove was
purchased or direct from the factory. To order from the fac-
tory-call,writeore-mailto:
Ardisam, Inc.
1360 First Avenue, Cumberland, Wisconsin 54829
1-800-345-6007 • 1-715-822-2415
E-mail: info@ardisam.com
Pleaseincludethefollowinginformationwithyourorder:
1. Part numbers
2. Part description
3. Quantity
4. Model number and serial number
Figure28:Removablereplate.