Filter
Top Products
Wall Box Dimmers and Switches Commercial Lighting Design Guide
Doc 4775A 73
Cresnet Wall Box Dimmers
Model Load Features
CLW-DIM
Wall Box Dimmer
(Stand-alone)
Supports incandescent
loads up to 1000 watts,
or magnetic low voltage
loads up to 1000VA/750 Watts
Four possible dimming level presets. The slide
switch selects between ADJUST, PRESET, and
OFF modes
CLW-DIM1
Wall Box Dimmer,
Single Button
(Stand-alone)
Supports incandescent
loads up to 1000 Watts,
or magnetic low voltage
loads up to 1000VA/750 Watts
Two possible dimming level presets. The slide
switch selects between ADJUST, PRESET, and
OFF modes
CLW-DIMS
Wall Box Master
Dimmer
(Master)
Supports incandescent
loads up to 1000 Watts,
or magnetic low voltage
loads up to 1000VA/750 Watts
Four possible dimming level presets. The slide
switch selects between ADJUST, PRESET, and
OFF modes. Serves as the master for multi-
point dimming control of a single load. Multi-
point dimming (similar to 3-way or 4-way
switching) is enabled using one CLW-DIMS
with one or more CLW-SLVD Slave Dimmers.
NOTE: In multipoint systems, only the master unit is connected to Cresnet. Slave units are connected by
the120V (Traveler) wire.
CLW-SLVD
Wall Box Slave
Dimmer
(Slave)
Supports incandescent
loads up to 1000 watts,
or magnetic low voltage
loads up to 1000VA/750 watts
One-gang wall mount slave dimmer designed
for use with the CLW-DIMS Wall Box Master
Dimmer to provide multi-point dimming control
of a single load.
The three pushbuttons on the CLW-SLVD
provide parallel functionality to those on the
CLW-DIMS
CLW-DIMS1
Wall Box Master
Dimmer, Single
Button
(Master)
Supports incandescent
loads up to 1000 Watts,
or magnetic low voltage
loads up to 1000VA/750 watts
Serves as the master for multi-point dimming
control of a single load. Multi-point dimming
(similar to 3-way or 4-way switching) is
enabled using one CLW-DIMS1 with one
or more CLW-SLVD1 Slave Dimmers
Two possible dimming level presets. The slide
switch selects between ADJUST, PRESET, and
OFF modes
CLW-SLVD1
Wall Box Slave
Dimmer, Single
Button
(Slave)
Supports incandescent
loads up to 1000 watts,
or magnetic low voltage
loads up to 1000VA/750 watts
One-gang wall mount slave dimmer designed
for use with the CLW-DIMS1 Wall Box Master
Dimmer to provide mult-point dimming control
of a single load
The single pushbutton on the CLW-SLVD1
provides parallel functionality to that on the
CLW-DIMS1
NOTE: In Multigang installation the inner tabs must be removed to fit and the load capacity must
be derated. See table below for derating information for various applications.
Derating Information for Incandescent and Tungsten Halogen Applications
Part Number No Side Removed One Side Removed Two sides removed
-DIM1 1000W 600W 400W
-DIMS1 1000W 600W 400W
-SLVD1 No Derating Necessary
Derating Information for Magnetic Low Voltage Applications
Part Number No Side Removed One Side Removed Two sides removed
-DIM1 1000VA/ 750W 600VA/450WW 400VA/300W
-DIMS1 1000VA/750W 600VA/450W 400VA/300W
-SLVD1 No Derating Necessary