Filter
Top Products
TABLE OF CONTENTS
Introduction 2-7
Safety symbol and signal word review ............... 2
Preparing your garage door ....................... 3
Tools needed .................................. 3
Planning .................................... 4-5
Carton inventory ................................ 6
Hardware inventory ............................. 7
Assembly 8-11
Assemble the rail ............................. 8-9
Fasten the rail to the motor unit and
install the trolley ............................... 10
Attach the rail brackets .......................... 11
Installation 11.26
Installation safety instructions .................... 11
Determine the header bracket location ............. 12
Install the header bracket ....................... 13
Attach the rail to the header bracket ............... 14
Install the Protector System ® .................. 15-17
Position the opener ............................ 18
Hang the opener .............................. 19
Install the door control .......................... 20
Electrical requirements .......................... 21
Complete safety reversing sensor installation ........ 21
Install the lights ............................... 22
Attach the emergency release rope and handle ...... 22
Fasten the door bracket ...................... 23-24
Connect the door arm to the trolley ............. 25-26
Adjustment 27-29
Adjust the travel limits .......................... 27
Adjust the force ............................... 28
Test the safety reversal system ................... 29
Test the Protector System ® ...................... 29
Operation 30.34
Operation safety instructions ..................... 30
Using your garage door opener ................... 30
Using the wall-mounted door control ............... 31
To open the door manually ...................... 31
Care of your opener ............................ 32
Having a problem? ............................. 33
Diagnostic chart ............................... 34
Programming 35.36
To add or reprogram a hand-held remote control ..... 35
To erase all codes from motor unit memory ......... 35
3-Button remotes .............................. 35
To add, reprogram or change a Keyless Entry PIN .... 36
Repair Parts 37.38
Rail assembly parts ............................ 37
Installation parts ............................... 37
Motor unit assembly parts ....................... 38
Accessories 39
Warranty 39
INTRODUCTION
Safety Symbol and Signal Word Review
This garage door opener has been designed and tested to offer safe service provided it is installed, operated,
maintained and tested in strict accordance with the instructions and warnings contained in this manual.
Mechanical
Electrical
When you see these Safety Symbols and Signal Words
on the following pages, they will alert you to the
possibility of serious injury or death if you do not
comply with the warnings that accompany them. The
haoard may come from something mechanical or from
electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it
will alert you to the possibility of damage to your garage
door and/or the garage door opener if you do not comply
with the cautionary statements that accompany it. Read
them carefully.