Filter
Top Products
Introduction
COLORado™ 1 IP User Manual Rev. 01c -3-
2. Introduction
Product
Description
The COLORado™ 1 IP is an RGBW wash light based on 42 LEDs. It consists of a
single pod with a double bracket mounting yoke. The AC power comes directly into the
fixture’s housing through a proprietary IP66 rated power input cord. The power linking
uses a proprietary IP66 rated power link cord. The DMX input and output signals use
proprietary IP66 DMX in and DMX out cords. The fixture comes with all the necessary
adapters to connect to the proprietary IP66 cords as well a power and signal link
cables. The COLORado™ 1 IP uses a display-based control panel for programming
functions.
Features
• 3, 4, 5, 6, or 11-channel RGBW LED wash light (with ID addressing)
• Operating modes:
3-channel: RGB control
3-channel: HSV (hue, saturation, and value) control
4-channel: RGB, dimmer
4-channel: RGBW control
5-channel: RGBW, dimmer
6-channel: RGBW, dimmer, strobe
11-channel: RGBW, ID, dimmer, strobe, macro, auto/custom, dimmer speed,
auto speed
• RGBW color mixing with or without DMX controller
• Automatic programs
• User configurable custom programs
• Recall auto and custom programs via master/slave or DMX
• Color temperature presets (3,200~10,000 K)
Additional Features
• Five distinct dimming curves
• 3-pin DMX input and output connectors
• Power linking: max 12 units @ 120 V
• LED display with password protection
• Gel frame holder (4 mm max thickness)
• Double-bracket yoke that doubles as floor stand
• Color calibration
• Durable and weather resistant IP66 rated housing
• IP66 power and DMX connectors
Options
• Optical systems: 15° (installed), 30° (CLENS3042)
• 16.4 ft (5 m) power extension cable (IP5POWER)
• 16.4 ft (5 m) signal extension cable (IP5SIG)