Filter
Top Products
39
Your garage door opener has been programmed at the factory to operate with your remote control. The remote control can be programmed using the door control or the garage door opener.
To program additional remote controls refer to the instructions provided with the additional remote controls or visit www.chamberlain.com.
O REMO E
TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN USING THE SMART CONTROL PANEL
4a
Press the button on the remote
control that you wish to operate
your garage door.
4b Enter a 4-digit personal
identifi cation number (PIN) of
your choice on the keyless entry
keypad. Then press the ENTER
button.
PIN
?? ??
1
2
3
GH
5
6
M
8
U
9
0
Q
#
NTER
0 QZ
#
ENTER
OR
1 Press the navigation
button below "MENU"
to view the Features
menu.
3 Select "REMOTE" or
"KEYPAD" to program from
the program menu. Press
to continue.
2 Use the navigation buttons
to scroll to "PROGRAM" and
press the navigation button
under
to continue.
TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN USING THE MOTION-DETECTING CONTROL PANEL
1 Press the LEARN button on the door
control to enter Programming Mode.
2 Press the LEARN button again, the
LED will fl ash once.
3a Press the button on the remote
control that you wish to operate
your garage door.
The garage door opener lights will fl ash (or two clicks will be heard) when the code has been programmed.
Repeat the steps above for programming additional remote controls or keyless entry devices.
The command LED will fl ash once.
The command LED will fl ash once again.
3b Enter a 4-digit personal
identifi cation number (PIN) of
your choice on the keyless entry
keypad. Then press the ENTER
button.
PIN
?? ??
1
2
3
4
GH
5
6
M
7
R
8
U
9
0
Q
*
#
ENTER
0 QZ
#
ENTER
OR
Remote Control