Filter
Top Products
38
SMART CONTROL PANEL SETUP
MENU NAVIGATION
The features on the door control can be programmed through a series of menus on the screen and the navigation buttons. Refer to the descriptions below.
CLOCK SETUP: Set the time, choose 12 or
24 hour clock and show/hide clock.
TTC SETTINGS (for sectional doors
ONLY): Set the Timer-to-Close feature
off/on and set the time interval before
door closes. NOTE: DO NOT enable TTC if
operating a one-piece door. TTC is to be
used ONLY with sectional doors.
LOCK: Enable/disable lock.
PROGRAM: Add remote controls, MyQ™
devices, an extra remote button to control
your garage door opener lights, or a
keyless entry.
FEATURES
Press the navigation button below "MENU"
to view the Features menu.
SCREEN
The main screen displays the time,
temperature, and current battery charge
(if applicable).
Navigation Buttons
Door Control
To program a remote control or keyless entry to the garage door opener using the door control see page 39.
SETTINGS
Press the navigation button below the
down arrow till you see TEMPERATURE to
view the Settings menu.
TEMPERATURE: Display the temperature
in Fahrenheit or Celsius and show/hide
the temperature.
LANGUAGE: Select a language (English,
French, or Spanish).
LIGHT SETTINGS: Set duration for
garage door opener light to stay on after
operation, selectable range of 1-1/2 to
4-1/2 minutes. Turn the Motion sensor
off/on, and turn the entry light feature
off/on.
CONTRAST: Adjust the contrast of the
screen.