Chamberlain WD962KPEV Garage Door Opener User Manual


 
18
Install the door bracket
8
Installation
ONE-PIECE DOORS
Option B
8.1B Center the door bracket on the top
of the door, in line with the header
bracket as shown.
8.2B Mark either the left and right, or the
top and bottom holes.
Metal Doors:
• Drill 3/16" pilot holes and fasten
the bracket with the self-threading
screws (H16) provided.
Wood Doors:
• Drill 5/16" holes and use 5/16"x2"
carriage bolts, lock washers and nuts
(not provided) or 5/16"x1-1/2" lag
screws (not provided) depending on
your installation needs.
NOTE: The door bracket may be
installed on the top edge of the door
if required for your installation. (Refer
to the dotted line optional placement
drawing.)
For a door with no exposed framing, or for the
optional installation, use lag screws 5/16"x1-1/2"
(not provided) to fasten the door bracket.
Vertical
Centerline
of Garage
Door
Optional
Placement
of Door
Bracket
Door Bracket
Header Bracket
Header Wall
2x4 Support
(Finished Ceiling)
H16
Door
Bracket
Top of Door
(Inside Garage)
Top Edge of
Door
Optional
Placement
Optional
Placement
Top Edge
of Door
Top of Door
(Inside Garage)
Door
Bracket
Carriage Bolt 5/16"x2"
(not provided)
Nut 5/16"-18
Lock Washer 5/16"
Metal Door
Wood Door