Filter
Top Products
3
Vermont Castings Seville
30001490
Specifications
Seville, Model 1635
Maximum heat output......................... 30,000 Btu’s/hr.
1
Area heated...................................... Up to 1320 sq. ft.
2
Fuel size/type ......................................18” (46 cm) logs
Loading ................................................................ Front
Chimney connector .................... 6” (150 mm) diameter
Chimney flue size ...................... 6” (150 mm) minimum
Flue exit position ..................................................... Top
Primary air ...Manually set, thermostatically maintained
Ash handling system .....................Removable ash pan
Glass panel ........................ High-temperature Infra-red
Weight ............................................................... 420lbs.
Width (Left leg - Right leg) ................... 23¹⁄₂” (59.0 cm)
Depth (Front of Ash Lip - Rear Shroud) . 28” (71.0 cm)
Height ................................................... 31¹⁄₄” (79.5 cm)
with Pedestal.............................. 34³⁄₄” (88.3 cm)
1
This value can vary depending on how the stove is
operated, the type and moisture content of the fuel
used, as well as the design, construction and climatic
location of your home. Figures shown are based on
maximum fuel consumption obtained under laboratory
conditions and on average efficiencies.
2
These values are based on operation in building code-
conforming homes under typical winter climate condi-
tions in New England. If your home is of nonstandard
construction (i.e., unusually well insulated, not insu-
lated, built under ground, etc.) or if you live in a more
severe or more temperate climate, these figures may
not apply. Since so many variables affect performance,
consult your Vermont Castings authorized dealer to
determine realistic expectations for your home.
23¹⁄₂”
(590mm)
28”
(711mm)
31¹⁄₄”
(795mm)
18¹⁄₂”
(470mm)
9¹⁄₂”
(240mm)
34³⁄₄"
(883mm)
23¹⁄₄"
(590mm)
Fig. 1 Seville 1635 dimensions.
Pedestal Option
Drawings not to scale.
1490