Filter
Top Products
8
4743040 AT0907
REMOVE SHIPPING BLOCKS
Step 10. On the fl ywheel remove the fi ve
shipping blocks by unscrewing the screws.
Set these screws aside for installing the
blades in Step 11.
Discard the fi ve shipping blocks.
BLADE/BLADE HOLDER INSTALLATION
Step 11. Using the fi ve screws removed in Step 10, and
the fi ve additional screws from the pack, attach each
blade/blade holder assembly to the motor.
Using the screwdriver, tighten securely by hand only.
REMOVE SWITCH HOUSING CAP SCREWS
Step 12. Remove the two screws of the switch housing cap.
Set the cap and screws aside for use in Step 15.
Shipping
Blocks